3/28/2023 0 Comments Photoline packages![]() ![]() The colour intensity and yield for machine dyeing can be seen in the yield table. Wash with detergent to remove any bleach residue from the textile and then dye again. It is therefore recommended to remove the dye from textiles with intensive colours. It has to be noted that the resulting colours will always be mixed shades, even for secondary dyeing with black. ![]() Secondary dyeing is always done from light to dark. The secondary dyeing table applies to coloured textiles. The original colours can only be achieved on white textiles. The remaining dye liquor can be poured directly down the drain. Then rinse the dyed silk in clear, lukewarm water. Stir constantly during the first 15 minutes, then in intervals of 3-5 minutes.Īfter a total dyeing time of 30 minutes, let the silk cool down to 30☌ in the dye liquor. Ensure that the temperature remains constant. Slowly heat the dye liquor with the silk from 30☌ to 60☌ in about 15 minutes and then dye for 15 minutes at 60☌. The silk has to float freely and has to be covered by the dye liquor at all times. Important: Do not allow any fabric lumps to form. Moisten the silk with lukewarm water and place the dripping wet item into the dye liquor. Stir salt and dye into 3 l of water at 50☌ and dissolve. Do not use the reactive agent for dyeing silk. If the amount of fabric is doubled, all quantities have to be doubled accordingly. Rinse the dyed fabric thoroughly and then wash with a mild detergent at 60☌. Move the textile constantly, ensuring that it is always covered by the dye liquor. Now stir the dissolved reactive agent into the dye liquor, ensuring not to pour the reactive agent directly onto the fabric.ĭye for 30 minutes at 60☌. Place the dripping wet fabric into the dye bath (dye liquor) and move in the liquor for about 2-3 minutes. Stir salt and dye into 5.5 l of water at 60☌ and dissolve. Soak the textile in cold water for about 10 minutes.ĭissolve the reactive agent in 0.5 l of water in a separate container, set aside. When used according to the instructions, FashionColor will leave no residue in the machine.ġ package FashionColor (1 sachet dye, 2 sachets reactive agent) After the programme has finished, leave the dyed textile in the machine and wash at the highest permitted temperature with a colour-preserving gentle detergent. Select the highest permitted temperature for mixed textiles, but at least 40☌. Set a 60☌ programme without pre-wash and start immediately. Place the dripping wet textile on the salt. Pour 1 kg salt over the dye and the reactive agent to ensure that these are fully covered by the salt. Place the dye and the reactive agent directly from the package into the washing machine drum. Soak the textile in cold water for about 10 minutes. Weigh textile precisely and determine the amount of dye accordingly. Színezősóként bármely közönséges só használható.įONTOS: Csak appretúra- és öblítőmentes (mosott) anyagokra fessünk! Közepesen erőstől halvány pasztellszínezésig alkalmas. A textíliát festés előtt mossuk ki! Selyem kézi festése is lehetséges.Įlegendő 500 – 1.500 g kelméhez (M-es méretű póló = kb. Befest minden appretúramentes textilanyagot pamutból, vászonból, viszkózból és kevert szálas szövetből (max. Marabu Fashioncolor csomag SZILVA (2x15 gr + 2x30 gr) Textilfesték főzésálló festéshez mosógépben. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |